דלג לתוכן הראשי

מחשבון השפעת איבוד פקטים

מעריך את הירידה בתפוקת TCP לפי קצב איבוד פקטים וגודל חלון TCP.

Inputs

Available bandwidth without packet loss

Packet loss rate from 0% to 100%

RTT in milliseconds (affects TCP throughput)

Packet Loss Impact

Results will appear here.

Even small amounts of packet loss have a disproportionately large impact on TCP throughput because TCP's congestion control algorithm responds aggressively to dropped packets. A network showing 1% packet loss might intuitively seem to deliver 99% of its theoretical bandwidth, but in practice TCP throughput can fall to a small fraction of link capacity — a fact that surprises many engineers the first time they encounter it.

This tool uses the Mathis formula to estimate steady-state TCP throughput given a packet loss rate and RTT, helping you quantify the real-world impact of a degraded network path and set expectations for application performance under adverse conditions.

כיצד לחשב אחוז אובדן מנות ברשת

  1. 1

    הכנס סטטיסטיקות מנות

    הכנס את סך המנות שנשלחו ואת מספר המנות שהתקבלו בהצלחה (או שאבדו). ניתן לקבל נתונים אלו מפלט פקודת ping או כלי ניטור רשת.

  2. 2

    חישוב אחוז אובדן מנות

    הכלי מחשב מיידית את אחוז אובדן המנות ומעריך את רמת איכות הרשת על בסיס תקנים תעשייתיים.

  3. 3

    צפייה בהערכת האיכות

    עיין בהערכת השפעת אובדן המנות על סוגי יישומים שונים (VoIP, סטרימינג וידאו, העברת קבצים, גלישת אינטרנט) ובהמלצות לשיפור איכות הרשת.

How Packet Loss Degrades TCP Throughput

The Mathis equation models TCP throughput as proportional to (MSS / RTT) × (1 / sqrt(p)), where p is the packet loss probability and MSS is the maximum segment size. This inverse-square-root relationship means throughput falls sharply as loss increases: at 1% loss on a 100 ms RTT path with 1460-byte MSS, achievable throughput drops to roughly 1.5 Mbps regardless of link capacity.

This sensitivity arises because each lost packet triggers a timeout or fast retransmit event, halving the congestion window. TCP must then slowly grow the window again via slow start or congestion avoidance. Modern TCP variants (CUBIC, BBR) handle some scenarios more gracefully, but all TCP implementations are fundamentally impaired by persistent packet loss.

מדוע להשתמש במחשבון אובדן המנות של FileCrank?

  • ✓ מחשב אחוז אובדן מנות על בסיס מספר המנות שנשלחו והתקבלו
  • ✓ מספק הערכת רמת איכות רשת על בסיס תקנים תעשייתיים
  • ✓ מנתח השפעת אובדן מנות על סוגי יישומים שונים
  • ✓ פועל לחלוטין בדפדפן — שום נתון אינו מועבר
  • ✓ חינמי ומתאים לאבחון תקלות רשת והערכת איכות

תכונות ומפרטים

גודל קובץ מקסימלי
עד 100 MB
פרטיות
הקבצים נמחקים לאחר כשעה
מחיר
חינם, ללא הרשמה
עיבוד
בשרת
Processing
100% client-side
Formula used
Mathis formula (TCP performance)
Input parameters
Packet loss rate, TCP window size, RTT
Cost
Free — no limits
החישוב מתבצע מקומית בדפדפן שלך — שום נתון אינו נשלח לשרתים.אין צורך בהרשמה.חינמי — ללא עמלות נסתרות.

שאלות נפוצות

How do I use the Packet Loss Calculator?

Enter the packet loss rate (as a percentage) and TCP window size (in bytes). The tool instantly calculates the estimated throughput reduction caused by packet loss.

What is packet loss?

Packet loss occurs when data packets fail to reach their destination. It is caused by network congestion, hardware failures, or poor link quality. Even small packet loss rates (1–2%) can significantly degrade throughput.

How does packet loss affect TCP throughput?

TCP responds to packet loss by reducing the transmission rate (congestion control). The Mathis formula estimates this reduction: throughput ≈ (window size) / (RTT × √packet_loss_rate). Higher loss = lower throughput.

What is an acceptable packet loss rate?

< 0.1% packet loss is excellent for most applications. 0.1–1% is acceptable for video streaming. 1–5% causes noticeable quality degradation. > 5% is poor and requires troubleshooting.

Does the calculator send my network data anywhere?

No. All packet loss calculations run entirely in your browser using the Mathis formula. Your network parameters never contact any server.

How can I reduce packet loss on my network?

Check link quality (run ping), reduce network congestion, upgrade hardware, use Quality of Service (QoS) prioritization, and consider redundant paths or faster links. Use this calculator to quantify the impact of improvements.

Packet Loss Calculator vs. iperf3

iperf3 measures actual throughput empirically by sending real traffic, which is the most accurate method but requires access to both endpoints and permission to generate test traffic. This calculator provides a theoretical estimate using only packet loss rate and RTT — values you can obtain from a simple ping — making it useful for quick capacity assessments and explaining to stakeholders why a link is underperforming.

מחשבון אובדן המנות של FileCrank מחשב אחוז אובדן מנות על בסיס מספר המנות שנשלחו והתקבלו ומספק הערכת איכות רשת על בסיס תקנים תעשייתיים. החישוב מתבצע מקומית בדפדפן ללא שמירת נתונים. חינמי ללא חשבון.

Advertisement

Ad