メインコンテンツへスキップ

IPv4サブネット計算ツール

IPv4 CIDRブロックからネットワークアドレス・ブロードキャスト・使用可能ホスト範囲・サブネットマスク・ワイルドカードマスク・ホスト数を計算します。

Inputs

Enter any valid IPv4 address

Subnet Details

Results will appear here.

Subnet calculation is a daily task for network engineers designing address plans, cloud architects partitioning VPC address space, and sysadmins configuring static IP assignments. Getting the network address, broadcast address, and usable host range right is critical — an off-by-one error can route traffic to the wrong host or leave an address range unreachable.

This tool takes any IPv4 address and CIDR prefix (or subnet mask) and instantly computes every derived value: network address, broadcast address, first and last usable host, subnet mask, wildcard mask, and total host count. It supports all prefix lengths from /0 to /32, including point-to-point /30 and /31 links.

オンラインでIPv4サブネットを計算する方法

  1. 1

    ネットワークアドレスを入力

    CIDR形式(例: 192.168.1.0/24)または個別にIPアドレスとサブネットマスクを入力します。ツールはドット区切り10進数とCIDRプレフィックス長の両形式を受け付けます。

  2. 2

    サブネットパラメータを計算

    ツールはネットワークアドレス、ブロードキャストアドレス、利用可能ホスト範囲、ホスト数、サブネットマスクを自動計算します。

  3. 3

    結果を確認して使用

    計算結果をネットワーク計画、ルーター設定、ファイアウォールルール、サブネット分割作業に使用します。

How IPv4 Subnet Calculation Works

An IPv4 address is a 32-bit integer. The prefix length defines a bitmask where the top N bits are 1 and the remaining bits are 0. The network address is the bitwise AND of the host address and the mask; the broadcast address is the bitwise OR of the network address and the inverted mask (wildcard mask). Usable hosts are all addresses strictly between these two values.

For /31 networks (RFC 3021), used on point-to-point links, there is no traditional network or broadcast address — both addresses are usable. For /32, the address represents a single host with no range. These edge cases are important to handle correctly in routing and firewall configurations.

FileCrank IPv4サブネット計算機を使う理由

  • ✓ ネットワークアドレス、ブロードキャストアドレス、ホスト範囲、利用可能ホスト数を計算
  • ✓ CIDR表記とドット区切り10進数サブネットマスクをサポート
  • ✓ ワイルドカードマスクと2進数表現を表示
  • ✓ 完全ブラウザ内で動作 — データを転送しない
  • ✓ ネットワークエンジニア、学生、システム管理者に最適で無料

機能と仕様

最大ファイルサイズ
最大100 MB
プライバシー
ファイルは約1時間後に削除されます
料金
無料、登録不要
処理方式
サーバーサイド
対応プロトコル
IPv4
処理
ブラウザローカル
データ保持
なし
費用
無料
計算はブラウザ内でローカルに完結 — サーバーにデータを送信しません。登録不要。無料 — 隠れた料金なし。

よくある質問

How do I use the IPv4 Subnet Calculator?

Enter an IPv4 address and either a CIDR prefix (e.g., /24) or a dotted-decimal subnet mask (e.g., 255.255.255.0). The tool instantly calculates all subnet values.

What is a subnet mask?

A subnet mask is a 32-bit value that divides an IPv4 address into a network portion and a host portion. For example, 255.255.255.0 means the first 24 bits are the network and the last 8 bits are for hosts.

How is the broadcast address calculated?

The broadcast address is calculated by setting all host bits (the bits after the network portion) to 1. For a /24 network ending in .0, the broadcast address ends in .255.

How many usable hosts are in a /24 subnet?

A /24 subnet has 256 total addresses. Subtracting the network and broadcast addresses leaves 254 usable host addresses.

Does any IP data I enter leave my browser?

No. All subnet calculations run entirely client-side. Your IP addresses and network data never leave your device or contact any server.

What is a wildcard mask?

A wildcard mask is the inverse of a subnet mask. It is used in access control lists (ACLs) and routing to specify which address bits must match. 0 = must match, 1 = can vary. For a subnet mask 255.255.255.0, the wildcard is 0.0.0.255.

Is this calculator useful for CCNA exam preparation?

Yes. Subnet calculation is a core CCNA skill. This tool helps you learn the math, verify your calculations, and understand network addressing in depth.

IPv4 Subnet Calculator vs. ipcalc

ipcalc is the classic command-line reference but requires shell access and produces plain-text output that must be parsed manually. This tool delivers the same calculations in a structured, copy-friendly web interface with clearly labelled fields — ideal when working in documentation, a ticketing system, or a browser-based cloud console where a terminal is not available.

FileCrank IPv4サブネット計算機は、ネットワークアドレス、ブロードキャストアドレス、ホスト範囲、利用可能ホスト数、ワイルドカードマスク、2進数表現を計算します。計算はブラウザ内でローカルに完結し、データを保存しません。アカウント不要で無料。

Advertisement

Ad