メインコンテンツへスキップ

パケットロス影響計算ツール

パケットロス率とTCPウィンドウサイズからTCPスループットの低下を推定します。

Inputs

Available bandwidth without packet loss

Packet loss rate from 0% to 100%

RTT in milliseconds (affects TCP throughput)

Packet Loss Impact

Results will appear here.

Even small amounts of packet loss have a disproportionately large impact on TCP throughput because TCP's congestion control algorithm responds aggressively to dropped packets. A network showing 1% packet loss might intuitively seem to deliver 99% of its theoretical bandwidth, but in practice TCP throughput can fall to a small fraction of link capacity — a fact that surprises many engineers the first time they encounter it.

This tool uses the Mathis formula to estimate steady-state TCP throughput given a packet loss rate and RTT, helping you quantify the real-world impact of a degraded network path and set expectations for application performance under adverse conditions.

ネットワークパケットロス率を計算する方法

  1. 1

    パケット統計を入力

    送信パケット総数と正常受信(または損失)パケット数を入力します。pingコマンドやネットワーク監視ツールの出力からこれらのデータを取得できます。

  2. 2

    パケットロス率を計算

    ツールはパケットロスのパーセンテージを即時計算し、業界標準に基づいてネットワーク品質等級を評価します。

  3. 3

    品質評価を確認

    異なるアプリケーション(VoIP、ビデオストリーミング、ファイル転送、Webブラウジング)へのパケットロスの影響評価と、ネットワーク品質改善の提案を確認します。

How Packet Loss Degrades TCP Throughput

The Mathis equation models TCP throughput as proportional to (MSS / RTT) × (1 / sqrt(p)), where p is the packet loss probability and MSS is the maximum segment size. This inverse-square-root relationship means throughput falls sharply as loss increases: at 1% loss on a 100 ms RTT path with 1460-byte MSS, achievable throughput drops to roughly 1.5 Mbps regardless of link capacity.

This sensitivity arises because each lost packet triggers a timeout or fast retransmit event, halving the congestion window. TCP must then slowly grow the window again via slow start or congestion avoidance. Modern TCP variants (CUBIC, BBR) handle some scenarios more gracefully, but all TCP implementations are fundamentally impaired by persistent packet loss.

FileCrank パケットロス計算機を使う理由

  • ✓ 送受信パケット数からパケットロスのパーセンテージを計算
  • ✓ 業界標準に基づくネットワーク品質等級評価を提供
  • ✓ 異なるアプリケーションタイプへのパケットロスの影響を分析
  • ✓ 完全ブラウザ内で動作 — データを転送しない
  • ✓ ネットワークトラブルシューティングと品質評価に最適で無料

機能と仕様

最大ファイルサイズ
最大100 MB
プライバシー
ファイルは約1時間後に削除されます
料金
無料、登録不要
処理方式
サーバーサイド
Processing
100% client-side
Formula used
Mathis formula (TCP performance)
Input parameters
Packet loss rate, TCP window size, RTT
Cost
Free — no limits
計算はブラウザ内でローカルに完結 — サーバーにデータを送信しません。登録不要。無料 — 隠れた料金なし。

よくある質問

How do I use the Packet Loss Calculator?

Enter the packet loss rate (as a percentage) and TCP window size (in bytes). The tool instantly calculates the estimated throughput reduction caused by packet loss.

What is packet loss?

Packet loss occurs when data packets fail to reach their destination. It is caused by network congestion, hardware failures, or poor link quality. Even small packet loss rates (1–2%) can significantly degrade throughput.

How does packet loss affect TCP throughput?

TCP responds to packet loss by reducing the transmission rate (congestion control). The Mathis formula estimates this reduction: throughput ≈ (window size) / (RTT × √packet_loss_rate). Higher loss = lower throughput.

What is an acceptable packet loss rate?

< 0.1% packet loss is excellent for most applications. 0.1–1% is acceptable for video streaming. 1–5% causes noticeable quality degradation. > 5% is poor and requires troubleshooting.

Does the calculator send my network data anywhere?

No. All packet loss calculations run entirely in your browser using the Mathis formula. Your network parameters never contact any server.

How can I reduce packet loss on my network?

Check link quality (run ping), reduce network congestion, upgrade hardware, use Quality of Service (QoS) prioritization, and consider redundant paths or faster links. Use this calculator to quantify the impact of improvements.

Packet Loss Calculator vs. iperf3

iperf3 measures actual throughput empirically by sending real traffic, which is the most accurate method but requires access to both endpoints and permission to generate test traffic. This calculator provides a theoretical estimate using only packet loss rate and RTT — values you can obtain from a simple ping — making it useful for quick capacity assessments and explaining to stakeholders why a link is underperforming.

FileCrank パケットロス計算機は送受信パケット数からパケットロスのパーセンテージを計算し、業界標準に基づくネットワーク品質評価を提供します。計算はブラウザ内でローカルに完結し、データを保存しません。アカウント不要で無料。

Advertisement

Ad