Packet Loss Impact Calculator
Estimate TCP throughput degradation given a packet loss rate and TCP window size.
Inputs
Packet Loss Impact
Results will appear here.
Even small amounts of packet loss have a disproportionately large impact on TCP throughput because TCP's congestion control algorithm responds aggressively to dropped packets. A network showing 1% packet loss might intuitively seem to deliver 99% of its theoretical bandwidth, but in practice TCP throughput can fall to a small fraction of link capacity β a fact that surprises many engineers the first time they encounter it.
This tool uses the Mathis formula to estimate steady-state TCP throughput given a packet loss rate and RTT, helping you quantify the real-world impact of a degraded network path and set expectations for application performance under adverse conditions.
How to Calculate TCP Packet Loss Impact Online
- 1
Enter packet loss rate and TCP window size
Specify the packet loss percentage (0β100%) and your TCP window size in bytes (e.g., 64 KB, 1 MB). Both parameters affect TCP throughput.
- 2
The calculator applies the Mathis formula
The tool uses the Mathis formula (derived from TCP congestion control) to estimate the maximum throughput achievable with the given packet loss rate.
- 3
View throughput degradation
The calculator displays the estimated throughput as a percentage of the theoretical maximum and shows the absolute throughput reduction caused by packet loss.
How Packet Loss Degrades TCP Throughput
The Mathis equation models TCP throughput as proportional to (MSS / RTT) Γ (1 / sqrt(p)), where p is the packet loss probability and MSS is the maximum segment size. This inverse-square-root relationship means throughput falls sharply as loss increases: at 1% loss on a 100 ms RTT path with 1460-byte MSS, achievable throughput drops to roughly 1.5 Mbps regardless of link capacity.
This sensitivity arises because each lost packet triggers a timeout or fast retransmit event, halving the congestion window. TCP must then slowly grow the window again via slow start or congestion avoidance. Modern TCP variants (CUBIC, BBR) handle some scenarios more gracefully, but all TCP implementations are fundamentally impaired by persistent packet loss.
Why Use FileCrank Packet Loss Calculator
- β Estimates TCP throughput degradation caused by packet loss using the Mathis formula
- β Accounts for TCP window size, RTT, and packet loss rate in calculations
- β Shows throughput reduction as a percentage for quick impact assessment
- β Runs entirely in your browser with no network data transmission
- β Essential for network capacity planning, quality-of-service tuning, and WAN optimization
Features & Specs
Frequently Asked Questions
How do I use the Packet Loss Calculator?
Enter the packet loss rate (as a percentage) and TCP window size (in bytes). The tool instantly calculates the estimated throughput reduction caused by packet loss.
What is packet loss?
Packet loss occurs when data packets fail to reach their destination. It is caused by network congestion, hardware failures, or poor link quality. Even small packet loss rates (1β2%) can significantly degrade throughput.
How does packet loss affect TCP throughput?
TCP responds to packet loss by reducing the transmission rate (congestion control). The Mathis formula estimates this reduction: throughput β (window size) / (RTT Γ βpacket_loss_rate). Higher loss = lower throughput.
What is an acceptable packet loss rate?
< 0.1% packet loss is excellent for most applications. 0.1β1% is acceptable for video streaming. 1β5% causes noticeable quality degradation. > 5% is poor and requires troubleshooting.
Does the calculator send my network data anywhere?
No. All packet loss calculations run entirely in your browser using the Mathis formula. Your network parameters never contact any server.
How can I reduce packet loss on my network?
Check link quality (run ping), reduce network congestion, upgrade hardware, use Quality of Service (QoS) prioritization, and consider redundant paths or faster links. Use this calculator to quantify the impact of improvements.
Packet Loss Calculator vs. iperf3
iperf3 measures actual throughput empirically by sending real traffic, which is the most accurate method but requires access to both endpoints and permission to generate test traffic. This calculator provides a theoretical estimate using only packet loss rate and RTT β values you can obtain from a simple ping β making it useful for quick capacity assessments and explaining to stakeholders why a link is underperforming.
Related Tools
FileCrank Packet Loss Impact Calculator estimates TCP throughput degradation from packet loss percentage and TCP window size using the Mathis formula from network performance research. All calculations run entirely client-side β no data is transmitted. Free to use with no account required. Also searchable as: packet loss calculator, TCP throughput degradation, Mathis formula calculator, network performance impact.
Advertisement